2.0MP 1/3 Panasonic CMOS Sensor Full HD 1080P Mini SDI CAMERA Digital CCTV Security SDI Camera OSD Menu 2.8-12mm varifocal lens

2.0MP 1/3 Panasonic CMOS Sensor Full HD 1080P Mini SDI CAMERA Digital CCTV Security SDI Camera OSD Menu 2.8-12mm varifocal lens

Features:

3M Pixels 2.8-12mm varifocal lens lens Min.Illumination:0.0003(Sens-up) •True Day/Night Mechanical Lens Filter(ICR) •TV Out(BNC) with NTSC/PAL Selectable •Dual Output-Megapixel HD-SDI(BNC)&CVBS:1.0 Vp-p 750hm Power Supply:DC12V Color:Black 1/3 inch progressive scan 2.1 Mega Pixel Sony CMOS Sensor • 1080p(1920*1080)@25/30fps • Support WDR,3D-DNR,DEFOG • OSD menu,Motion detection,Privacy Zone,HLC,BLC • AWB/ATW/PUSH/MANUAL • HD-SDI(SMPTE 292M compatible)/CVBS:1.0 Vp-p Composite Signal(750hm)

Technical Specifications

Full HD Mega Pixel(1080P)

High Definition is at least a million pixels per frame. So it can provide more clear and greater image. Besides

resolution ability is over 1,100 TV Lines.

1.WDR(Wide Dynamic Range)

This is the ability to expand the dynamic range. This function uses alternative exposure time control method.

2 3D Digital Noise Reduction

This feature removes noise in images(spatial, temporal domain)

Temporal noise is reduced by 3D filter using frame memory and spatial noise is reduced by 2D filter.

Especially, the ghost effect is reduced by motion adaptive filter.

3D-WDR(Digital Wide Dynamic Range)

This function is a local adaptive contrast enhancement. It uses a histogram analysis and tone mapping

method in pixel domain.

Motion Object Detection

This function detects the Motioned object in the image

-. Detection Resolution: 8×8 pixels

-. Detection Object Size: Variable

-. Detection quantity: 16 ea

Lens Shading Compensation

This function compensates shading effect caused by Lens. It uses 2D shading table for compensation.

D-Zoom

The control resolution is 256 sub pixel units. Also, the center of zoom can be varied in the image.

Live Defect Detection & Correction

This function corrects the defect of image at run-time. It supports two modes. Those are “Manual” and

“Auto” mode.

Avoid aiming the camera directly towards extremely bright objects such as sun,

as this may damage the CMOS image sensor.

Do not use the camera in the extreme environments.

– Extremely hot or cold place such as radiators, heat registers

(Operating condition -10 ~ +50, under 90% humidity)

– Close to generators of powerful electromagnetic radiation.

– The place which is subject to light reflections, unstable lighting conditions,

strong vibration.

Remove dust or dirt on the surface of the CMOS with a blower.

Do not apply excessive voltage. (Operating Power Input : DC 8V ~24V)

The following phenomena that may appear in images are specific to CMOS.

They do not indicate malfunctions.

– White Flecks : The fleck especially tend to be seen when operation at a high

environmental temp. or when you have raised the master gain and

use in sense-up function.

– Vertical Smear : When an extremely bright object, such as a strong spotlight or

flashlight, is being shot, vertical tails may be produced on the screen,

or the image may be distorted.

– Alias : When fine patterns, stripes, or lines are shot, they may appear or flicker.

Do not drop objects on the product or apply strong blows to it.

Do not install the unit in humid, dusty, or sooty locations.

Doing so may cause fire or electric shock.

Package Include:

1 x Mini SDI Camera 1 x Bracket 1x instruation 1x bracket Note:Package list are not included the power adapter! To Customers :

Thanks for your attention to our products.if you have any question ,pls fell free to contact with us !

we will replyed you within 24hours!!!

Below Lens,some of them can be replaced for different angle view &distance requirement ! pls talk with us whether it is available for the camera !