7″IPS Touch H.265/H.264 4K IP+Analog+AHD+CVI+TVI+SDI CCTV Camera Tester (multimeter, cable locator,TDR,HDMI input Optional)

1

Press more than 2 seconds, turn on or off the device ,short press to turn on or off the menu display

2

Menu key

3

4xzoom the image displays.

4

Far focus: Focus the image faraway

5

Near focus: Focus the image nearby

6

TELE: zoom in the image

7

WIDE: zoom out the image

8

Open/set ,Confirm the setting of parameters, open or enlarge the aperture

9

Return/Close : Return or cancel while setting parameters of the menu, close or decrease the aperture

10

Upward, set function or add parameter. Tilt the PTZ upward

11

Rightward, select the parameter whose value will be changed. Add the value of the parameter. Pan the PTZ right

12

Downward, set function or reduce the value of the parameter. Tilt the PTZ downward

13

Leftward, select the parameter whose value will be changed

14

Confirm key

15

Return/Close : Return or cancel while setting parameters of the menu, close or decrease the aperture

17

The charge indicator: it lights red while the battery is being charged. As the charging is complete, the indicator turns off automatically

18

The RS485 data transmission indicator: it lights red while the data is being transmitted

19

The data received indicator: it lights red while the data is being received

20

The power indicator: it lights green while the tester is powered on by the adapter

Top interface

Bottom interface

21

Visible red laser source emits Interface (Optional)

22

DC12V2A power output , for provisional DC power supply

23

HDMI IN (Optional )

24

CVBS IN/AHD /TVI/CVI Coaxial interface /（BNC interface）(AHD /TVI/CVI Optional )

25

Video signal output（BNC interface）/ cable tracer interface

26

Optical power meter interface (Optional)

27

LED lamp

28

RS485 Interface: RS485communication for the PTZ

29

SDI input (BNC interface) ( Optional)

30

TDR cable test interface (Optional)

31

HDMI output interface

32

Micro SD card moveable,(comes with 8GB, supports up to 32GB)

33

UTP cable port: UTP cable tester port/ Cable tracer port

34

PSE power sourcing equipment. Tests PoE voltage

35

PoE power supply output or LAN test port (Use to test PoE or non-PoE IP camera)

36

Audio output and earphone interface

37

Audio input

38

USB 5V 2A power output (used only for power, not data)

39

DC12V2A charging interface

40

DC12V2A power output , for provisional DC power supply